Router>enable
Router#configure terminal
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#hostname router_eneng
router_eneng(config)#enable password
123456789
router_eneng(config)#interface
fastEthernet 0/0
router_eneng(config-if)#ip address
192.168.10.100 255.255.255.0
router_eneng(config-if)#no shutdown
router_eneng(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
router_eneng(config-if)#exit
router_eneng(config)#exit
router_eneng#
%SYS-5-CONFIG_I: Configured from
console by console
router_eneng#write memory
Building configuration...
[OK]
router_eneng#
0 komentar:
Posting Komentar